• GA-2000(L)

    Specifications

    Description Unit GA-2000 L
    CAPACITY Max. / Swing over saddle mm(in) 580 mm (22.83″)
    Max. Turning Diameter mm(in)  350 mm (13.77″)
    Max. Turning Length mm(in) 1,204 mm (47.39″)
    Bar Capacity mm(in) 51 mm (2’)
    SPINDLE Chuck Size (in) (8″)
    Hole through spindle mm(in) 66mm (2.59″)
    Spindle Speed (rpm) rpm 4,800 rpm
    Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW)
    Motor (Max/Cont.) kW(HP)
    Torque (Max/Cont.) N.m 360 N-m
    Spindle Type Direct Belt Drive
    Spindle Nose A2-6
    FEED Travel (X/Z) mm(in) (205mm (8.07’) (1,230mm (48.42”)
    Rapid Travel (X/Z) m/min 20 m/min
    Slide Type Hardened & Ground Box Ways
    X-axis servo motor HP (KW) 2.1 HP ( 1.6 kW)
    Z-axis servo motor HP (KW) 4 HP ( 3.0 kW)
    BLOCK TOOL No. of Tool / Stations T 12
    Tool Size OD mm(in) 25mm (1’)
    ID   mm(in) 40mm (1’)
    TANK CAPACITY Coolant Tank Gallon / litre 38 gal (145L)
    Lubricating Tank ℓ(gel)
    POWER SUPPLY Electric Power Supply kVA 220
    Thickness of Power Cable Sq
    Voltage KVa 26 kVa
    MACHINE Dimensions
    (L×WxH)
    mm(in) 4,235 x 1,630 x 1,890 mm ( 166.7″ x 64.2″ x 74.4″ )
    Weight kg(lb) 4,600 kg ( 10,120 lb )
    NC Controller FANUC Oi-TC
  • GA-2000C

    Specifications

    Description Unit GA-2000 C
    CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″)
    Max. Turning Diameter mm(in)  351 mm (13.8″)
    Max. Turning Length mm(in) 309 mm (12.16″)
    Bar Capacity mm(in) 51 mm (2’)
    SPINDLE Chuck Size (in) (8″)
    Hole through spindle mm(in) 66mm (2.59″)
    Spindle Speed (rpm) rpm 4,800
    Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW)
    Motor (Max/Cont.) kW(HP)
    Torque (Max/Cont.) N.m 238 N-m
    Spindle Type Direct Belt Drive
    Spindle Nose A2-6
    FEED Travel (X/Z) mm(in) (230mm (90’) (630mm (24.8’)
    Rapid Travel (X/Z) m/min 30 m/min
    Slide Type Hardened & Ground Box Ways
    X-axis servo motor HP (KW) 2.1 HP ( 1.6 kW)
    Z-axis servo motor HP (KW) 4 HP ( 3.0 kW)
    BLOCK TOOL No. of Tool / Stations T 12
    Tool Size OD mm(in) 25mm (1’)
    ID   mm(in) 40mm (1’)
    TANK CAPACITY Coolant Tank Gallon / litre 55 gal (200L)
    Lubricating Tank ℓ(gel)
    POWER SUPPLY Electric Power Supply kVA 220
    Thickness of Power Cable Sq
    Voltage KVa 200
    MACHINE Dimensions
    (L×WxH)
    mm(in) 78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm )
    Weight kg(lb) 3,500 kg (7,700lb)
    NC Controller FANUC Oi-TC
  • GLS-2000(L)

    Specifications

    Description Unit GLS-2000 L
    CAPACITY Max. / Swing over saddle mm(in) 230 mm (9″)
    Max. Turning Diameter mm(in)  390 mm (15.35″)
    Max. Turning Length mm(in) 630 mm (24.8″)
    Bar Capacity mm(in) 51 mm (2’)
    SPINDLE Chuck Size (in) (8″)
    Hole through spindle mm(in) 76mm (3″)
    Spindle Speed (rpm) rpm 4,500
    Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW)
    Motor (Max/Cont.) kW(HP)
    Torque (Max/Cont.) N.m
    Spindle Type Direct Belt Drive
    Spindle Nose A2-6
    FEED Travel (X/Z) mm(in) (230mm (90’) (630mm (24.8’)
    Rapid Travel (X/Z) m/min 30 m/min
    Slide Type Linear Guide Way
    X-axis servo motor HP (KW) 3.6 HP ( 2.7 kW)
    Z-axis servo motor HP (KW) 3.6 HP ( 2.7 kW)
    BLOCK TOOL No. of Tool / Stations T 10
    Tool Size OD mm(in) 25mm (1’)
    ID   mm(in) 40mm (1/2’)
    TANK CAPACITY Coolant Tank Gallon / litre 42 gal (160L)
    Lubricating Tank ℓ(gel)
    POWER SUPPLY Electric Power Supply kVA 220
    Thickness of Power Cable Sq
    Voltage V/Hz
    MACHINE Dimensions
    (L×WxH)
    mm(in) 103″ x 71″ x 69″ ( 2,612 x 1,780 x 1,752 mm )
    Weight kg(lb) 3,400 kg (7,500lb)
    NC Controller FANUC Oi-TF
  • GS-2000(L)

    Specifications

    Description Unit GS-2000 L
    CAPACITY Max. / Swing over saddle mm(in) 800 mm (31.49″)
    Max. Turning Diameter mm(in)  570 mm (22.44″)
    Max. Turning Length mm(in) 780 mm (30.69″)
    Bar Capacity mm(in) 51 mm (2’)
    SPINDLE Chuck Size (in) (8″)
    Hole through spindle mm(in) 65mm (2.55″)
    Spindle Speed (rpm) rpm 4,800 rpm
    Motor output ( cont. / 30 min.) Hp / kW 15 / 18.5 kW
    ( 20 / 25 HP)
    Motor (Max/Cont.) kW(HP)
    Torque (Max/Cont.) N.m
    Spindle Type Belt-Drive
    Spindle Nose A2-6
    FEED Travel (X/Z) mm(in) (300mm (11.81’) / (780mm (30.69’)
    Rapid Travel (X/Z) m/min 30 m/min
    Slide Type Hardened & Ground Box Ways
    X-axis servo motor HP (KW) 3.6 HP ( 2.7 kW)
    Z-axis servo motor HP (KW) 6.0 HP ( 4.5 kW)
    BLOCK TOOL No. of Tool / Stations T 12
    Tool Size OD mm(in) 25mm (1’)
    ID   mm(in) 40mm (1’)
    TANK CAPACITY Coolant Tank Gallon / litre 80 gal (300L)
    Lubricating Tank ℓ(gel)
    POWER SUPPLY Electric Power Supply kVA 200
    Thickness of Power Cable Sq
    Voltage V/Hz
    MACHINE Dimensions
    (L×WxH)
    mm(in) 3,550 x 2,120 x 2,260          ( 139.76’x 83.46’x 70.86’)
    Weight kg(lb) 6,500 kg (14,330lb)
    NC Controller FANUC Oi-TD (Opt. 31i)

Shop By Department