Yama Seiki GLS-200Y

In stock

Specifications

Description Unit GLS-200Y
CAPACITY Max. / Swing over saddle mm(in) 310 mm (12.2″)
Max. Turning Diameter mm(in)  360 mm (14.17″)
Max. Turning Length mm(in) 500 mm (19.68″)
Bar Capacity mm(in) 65 mm (2.55’)
SPINDLE Chuck Size (in) (8″)
Hole through spindle mm(in) 76mm (2.99”)
Spindle Speed (rpm) rpm 4,500 rpm
Motor output ( cont. / 30 min.) Hp / kW 15 / 20 HP (11 / 15 kW)
Motor (Max/Cont.) kW(HP)
Torque (Max/Cont.) N.m
Spindle Type Direct Belt Drive
Spindle Nose A2-6
FEED Travel (X/Z) mm(in) 210 / 520 mm (8.26”)
Rapid Travel (X/Z) m/min 30m/min
Slide Type Linear Guide Way
X-axis servo motor HP (KW) 3.6 HP(2.7kW)
Z-axis servo motor HP (KW) 6.0 HP (4.5kW)
BLOCK TOOL No. of Tool / Stations T 12
Tool Size OD mm(in) 25mm(0.98”)
ID   mm(in) 40mm(1.57”)
TANK CAPACITY Coolant Tank Gallon / litre 80 gal / 300 L
Lubricating Tank ℓ(gel)
POWER SUPPLY Electric Power Supply kVA 20kVA
Thickness of Power Cable Sq
Voltage V/Hz
MACHINE Dimensions
(L×WxH)
mm(in) 2,480 x 1,655 x 2,060 mm (97.63”x 65.15”x81.1”)
Weight kg(lb) 3,500 kg (7,716lb)
NC Controller FANUC Oi – TF
Compare

High Speed Turning Centers

Packed with industry leading technology and top quality components, the YAMA SEIKI GLS series turning centers combine power, strength, and speed to bring you The Ultimate Machining Power®. These high speed machines will easily accomplish the demanding turning applications of today and tomorrow. Furthermore, with available live tooling, C-axis, and Y-axis capabilities; milling, turning applications may be completed in one single machine.

  • 30˚ slant-bed design provides smooth chip disposal and easier operator access.
  • Stainless steel way covers and special steel wipers molded with industrial strength rubber are used for durability.
  • Fully enclosed splashguards keep chips and coolant contained for a safe clean working environment.
  • The auto lubrication system delivers metered amounts of lubrication to the slide ways, ball screws, and vital components. Distribution is automatically shut off during idling to prevent waste.

Y-axis 

( Opt ; For Y models )

Y-axis models perform virtually the same way as machining centers equipped with 4th-axis rotary tables, but with the benefit of built-in turning capability. The X, Y, Z axes are like that of a machining center, while the C-axis acts as the 4-axis. This configuration replaces a turning center and machining center equipped with 4th-axis with one machine, thus, saving money, time, floor space, manpower and fixture costs, while reducing accuracy lost by eliminating the part from being moved to another machine.

Live tooling turret

( Opt ; For M models )

Live tooling and C-axis control capabilities on the GLS series allows the machine to perform multiple tasks on a work piece, such as turning, milling, drilling and tapping. This eliminates manpower and cycle time, while reducing accuracy lost, which will occur if the part is moved from machine to machine.

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Shop By Department